Generally speaking, the main reasons affecting the speed of laser marking machine can be divided into: one is the equipment itself, one is the processing of the workpiece, the main reasons of the equipment itself are laser frequency, laser spot mode and light divergence Angle laser power, reasonable optical processing, another reason is the marking density, marking range, marking depth and laser spot size.

1, marking density: in the same format, the same spot, the same depth, marking density is higher, the marking speed is slower, because the high density laser marking machine directly increases the marking area.

2, marking range: a large range of marking speed than a small range of marking speed is slower, because a large range of marking vibrator deflection area increases, naturally will have a certain impact on the speed of marking.

3, marking depth: according to demand, if you need to deepen the marking depth, you need to adjust the parameters of the fiber laser marking machine, increase the power and current of the fiber laser marking machine and other parameters, which will affect the marking speed.

4, laser spot size: marking character density fiber laser marking machine will also affect the speed. In the marking area is the same, the same spot, marking depth is the same, the marking density is higher, marking speed is slower, after all, to mark the character density is large, is equivalent to directly increase the area to mark.

Laser marking machine how to maintain.

1. For the overall situation of the equipment, whether the lubrication is normal, whether the mobile phone and strong magnetic objects are close to the galvanometer, whether the laser marking machine should not exceed 20A current, whether hands or other objects should not touch the lens, and whether there is abnormal sound during the operation of the equipment.

2. Cleaning of lens: Engraving machine has 3 mirrors and 1 focusing mirror (No. 1 mirror is located in the laser tube emission outlet, No. 2 mirror is located in the left end of the beam, No. 3 mirror is located at the top of the fixed part of the laser head, after focusing from the laser head, the lens is easy to be stained with dust or other pollutants, resulting in laser loss or lens damage, No. 1 and No. 2 lens cleaning do not need to be removed, first of all, the cleaning liquid on the cleaning cloth, and then from the middle, rotation to the outside Sassafras, until clean, UV laser marking machine.

3. Check whether all protection plates and cover plates of the motor automatic assembly line work normally. Throughout the trip, step by step through each shaft, and observe smooth operation and other relevant operations.

4. Maintenance personnel shall pass regular inspection. Are the cabinets and motors abnormally hot? Is there any unusual sound or smell? Does the pressure gauge show them as normal? As well as pipeline connection there is no leakage, lubrication is good. To prevent breakdowns and accidents, and to resolve any abnormal conditions in a timely manner.

5. The correct use of motor automatic assembly line is the key to reduce equipment failure and extend service life. It plays a very important role in preventive maintenance. According to statistics, one third of motor automatic assembly line failures are caused by human factors, general maintenance (such as refueling, cleaning, inspection, etc.). It's done by an operator. The solution is to emphasize the awareness of equipment management, use and maintenance. Strengthen business and technical training to improve the quality of operators.

6. Shut down the machine before the end of work every day, and then clean up all kinds of waste residue left in each working area of the motor automatic assembly line every day. In particular, do not let materials, tools or waste fall into the chain to prevent normal operation, damage and other accidents.